DE XIX and the 357 M working well.
Just thought I would start this topic...Some bought the 1 & 2 because of the 357 M. Then 44 M came into picture etc...I bought the XIX for the ability to go to 50AE and 440 Corbon, 44 M being the...
View ArticleRe: DE XIX and the 357 M working well.
i am sure the gas port volume is different to allow each caliber to work efficiently. since the port is contained in the barrel, it is fixed to each caliber. that is my guess at least.
View ArticleRe: DE XIX and the 357 M working well.
Another reason not to shoot lead if what you mention is true. Makes sense thinking on it for the last 10 hours That topic (shooting lead) comes up a lot... GAB
View ArticleRe: DE XIX and the 357 M working well.
I bought a new American .357 barrel and bolt for my .44 Magnum IWI MkXIX. It runs flawlessly, as long as you use standard pressure or hotter .357 with at least a 158 grn bullet. Experimentation...
View ArticleRe: DE XIX and the 357 M working well.
Back in the 60's most LEO shot the 38 spl in the area I worked, no semi autos...CHP decided to go to the 357 Mag and Ventura PD went to the 41 Mag. Long and short of it, many in CHP shot the 38's for...
View ArticleRe: DE XIX and the 357 M working well.
Well if that is the case, when ordering the springs from them... Then springs and possible bigger opening are running neck and neck imho... And if the drilled hole to and from is all the same and it...
View ArticleRe: DE XIX and the 357 M working well.
The Mk I and Mk VII .357 Magnum used a different recoil spring assembly. It only had one spring on each rod. The Mk XIX uses the same springs for all three calibers. I used the same springs my .44 Mag...
View ArticleRe: DE XIX and the 357 M working well.
VIP357 wrote:Boxilar wrote: The Mk I and Mk VII .357 Magnum used a different recoil spring assembly. It only had one spring on each rod. The Mk XIX uses the same springs for all three calibers. I used...
View ArticleRe: DE XIX and the 357 M working well.
Thanks Boxilar. You have helped me understand this Beast a little more. I was a little unaware of the Barrel break in till now. I assume that was why it shot High for about a thousand rounds, now it...
View ArticleRe: DE XIX and the 357 M working well.
The point of aim set up for the sights, is/are 100 yds...If you added a scope as you mention, that can change things for sure. GAB
View ArticleRe: DE XIX and the 357 M working well.
You mean inside the barrel probably copper, from the bullets... GAB
View ArticleRe: DE XIX and the 357 M working well.
That would be a good one to contact the maker of that pistol and find out imho... Humidity in your area is high, but that is off the wall imho... Spray it with WD, be careful that is all you...
View Article
